:wq - blog » harimau http://writequit.org/blog Tu fui, ego eris Mon, 22 Dec 2014 14:54:59 +0000 en-US hourly 1 http://wordpress.org/?v=4.1.5 NSM-Console version 0.6 release http://writequit.org/blog/2008/03/14/nsm-console-version-06-release/ http://writequit.org/blog/2008/03/14/nsm-console-version-06-release/#comments Fri, 14 Mar 2008 19:50:29 +0000 http://writequit.org/blog/?p=155 nsmmonkeyI’m happy to announce the release of the next version of NSM-Console. Version 0.6. If you are unfamiliar with NSM-Console, here’s the synopsis from the project page:

NSM-Console (Network Security Monitoring Console) is a framework for performing analysis on packet capture files. It implements a modular structure to allow for an analyst to quickly write modules of their own without any programming language experience. Using these modules a large amount of pcap analysis can be performed quickly using a set of global (as well as per-module) options. It aims to be simple to run and easy to understand without a lot of learning time.

The recently posted NSM-Console whitepaper is a good place to start if you want an introduction to NSM-Console.

You can download NSM-Console 0.6 from the project page.

Here are the highlights for the changes in this version, check the TODO and CHANGELOG for a full list of changes.

The dump command
The dump command lets you dump either the payload (in ascii format), or the full packet (with the -f flag) to a file, you can specify ranges like 1-20, 5,7,9-* and 1-* just like you can with the print command, extremely useful for picking and choosing packets to dump to a file. Here’s an example:

nsm> dump 1-5,10-* file.txt
Writing (append) packet(s) 1 through 5 from /Users/hinmanm/data.pcap to file.txt...
Writing (append) packet(s) 10 through * from /Users/hinmanm/data.pcap to file.txt...

And another of the full dump

nsm> dump -f 20,56-59 full.out
New args: 20,56-59 full.out
Dumping full packet, not just payload...
Writing (append) packet(s) 20 through 20 from /Users/hinmanm/data.pcap to full.out...
Writing (append) packet(s) 56 through 59 from /Users/hinmanm/data.pcap to full.out...

Performance improvements for harimau and checkip
The Harimau module, as well as the checkip command, now use wget (if it’s installed) instead of Ruby’s HTTP request library, this results is a much much faster query time. Another performance tweak was that reverse dns lookups for most modules is now turned off by default because it was taking extremely long for large pcaps

New modules: clamscan, foremost, trace-summary
New modules have been included in this release, clamscan, which scans extracted files (from either the tcpxtract or foremost modules) for viruses, foremost, which is another file extractor and trace-summary, which provides an extremely nice summary of traffic in the pcap

NSM-Console handle’s gzip’d files
You can now specify a gzip’d file directly to NSM-Console, it will attempt to decompress the file into a temporary file when it is loaded. Note that directories of gzip’d files is still not supported entirely.

Bro-ids and Snort changes
Bro-IDS has been split into 2 modules, one for protocol analysis and the other for generating content streams.
Snort has had its community and emerging rules updated to the latest revisions.

As always, bugfixes and minor enhancements, check out the full changelog for a list of what’s changed. If you have any requests for additional features or modules, be sure to leave a command and let me know :)

Also, if anyone out there wants to see what my ~/.nsmcrc looks like, you can find it here.

]]>
http://writequit.org/blog/2008/03/14/nsm-console-version-06-release/feed/ 0
NSM-Console version 0.5 release http://writequit.org/blog/2008/02/05/nsm-console-version-05-release/ http://writequit.org/blog/2008/02/05/nsm-console-version-05-release/#comments Tue, 05 Feb 2008 20:08:02 +0000 http://writequit.org/blog/?p=144 smallmonkeyThat’s right, no development release this time around. I’ve been trying to get version 0.5 all finished for the Hex 1.0.3 release, and I’m happy to present the newest NSM-Console release!

Firstly, you can download NSM-Console version 0.5 here:
http://writequit.org/projects/nsm-console/files/nsm-console-0.5.tar.gz

Mirror here:
https://secure.redsphereglobal.com/data/dakrone/files/nsm-console-0.5.tar.gz

Like always, let’s go over some of the new features in this release:

Alias command
You can now alias a command whatever else you would like to, the syntax is the same as regular bash alias syntax, for instance, here are my aliases from my ~/.nsmcrc:
alias ls = list
alias ll = list
alias serv = e cat /etc/services | grep

So as an example, if I wanted to look up a service port, now I just type “serv 5190” and see if /etc/services has an entry for that port. (I have a habit of hitting ‘ll’ or ‘ls’ all the time, so now at least they’re useful)

Additional modules: flowtime and harimau
I added a couple of modules, the first is flowtime, which is a packet timeliner that I wrote about in this post. The second is the Harimau module, which will query the Harimau watchlist for all the IPs in a pcap file and print out the matching entries. Thanks go to Spoonfork and the Security.org.my team for the awesome tool.
Note: flowtime won’t work out of the box in Hex unless you install Argus version 3 (not version 2, which is what Hex comes with) as well as symlink ‘ploticus’ to ‘pl’ somewhere in your path.

Checkip command
Speaking of the Harimau watchlist, it has also been integrated as an NSM-Console command. You can see an example here:
nsm> checkip 209.177.146.34
209.177.146.34,www.emergingthreats.net/rules/bleeding-botcc.rules,botcc,2008-02-05 00:03:10

Module improvements
The snort module now uses the ac-bnfa search algorithm, which should help on systems with lower amounts of RAM (*cough* like my own). In addition, the bro-ids module now actually generates many more helpful reports and actually performs intrusion detection instead of just generating flow content. Some modules have been added to categories to make them easier to toggle.

Other minor improvements
Toggle handles multiple module names, space separated
All NSM-Console errors finally go to STDERR instead of STDOUT
Help command is much more readable and supports argument to get help about a particular command.
~./nsmcrc is read extremely quietly now, so it doesn’t fill up the screen
Bugfixes.

You can read the entire changelog here.

As always, please please please let me know if you have any comments, criticisms or suggestions :) Feel free to email me or leave a comment below.

]]>
http://writequit.org/blog/2008/02/05/nsm-console-version-05-release/feed/ 3
NSM Console projected module list http://writequit.org/blog/2007/11/28/nsm-console-projected-module-list/ http://writequit.org/blog/2007/11/28/nsm-console-projected-module-list/#comments Wed, 28 Nov 2007 21:43:28 +0000 http://writequit.org/blog/?p=95 Here’s a list of all the planned modules and completed (struck-out) modules for nsm-console: (if a module is struck out, it’s because I’ve finished making a module for it, it isn’t necessarily in the tarball for download)

  • aimsnarf
  • ngrep (gif/jpg/pdf/exe/pe/ne/elf/3pg/torrent)
  • tcpxtract
  • tcpflow
  • chaosreader
  • bro-IDS
  • snort
  • tcpdstat
  • capinfos
  • tshark
  • argus
  • ragator
  • racount
  • rahosts
  • hash (md5 & sha256)
  • ra
  • honeysnap
  • p0f
  • pads
  • fl0p
  • iploc
  • foremost – thanks shadowbq!
  • flowgrep
  • tcptrace
  • tcpick
  • flowtime
  • flowtag
  • harimau
  • clamscan

Think of any other useful modules? Leave me a comment and let me know!

P.S. I’m also brainstorming for some pcap/real-time network visualization tools, stay tuned!

]]>
http://writequit.org/blog/2007/11/28/nsm-console-projected-module-list/feed/ 3