If you get this error:

cc -I. -I../libpcap-0.7.1 -DLINUX -D__FAVOR_BSD -D_LARGEFILE_SOURCE=1 -D_FILE_OFFSET_BITS=64 -L../libpcap-0.7.1 -c stat.c
cc -I. -I../libpcap-0.7.1 -DLINUX -D__FAVOR_BSD -D_LARGEFILE_SOURCE=1 -D_FILE_OFFSET_BITS=64 -L../libpcap-0.7.1 -c net_read.c
net_read.c:74:1: warning: "__FAVOR_BSD" redefined
<command line>:1:1: warning: this is the location of the previous definition
net_read.c:149: error: static declaration of ‘packet_length’ follows non-static declaration
tcpdstat.h:415: error: previous declaration of ‘packet_length’ was here
make: *** [net_read.o] Error 1

Edit the net_read.c file and change line 149 from this:

static int packet_length; /* length of current packet */

to this:

int packet_length; /* length of current packet */

Simple eh? Just type “make” again and tcpdstat should compile just fine. Simple fix.

If all else fails, run “sudo find /opt/local/var/macports/build -name "wdg.*" -print” and it should print the locations of the files. NOTE: These files will only exist *after* attempting the build with macports, so attempt to build first (sudo port install ettercap-ng), and then look for the files. Hope this helps!

UPDATE:
After talking to people in IRC, I found the real root of this problem, wdg.h and wdc.h need to have #include <sys/types.h> included at the top of the file. At this time, I recommend you attempt the install using MacPorts by doing sudo port install ettercap-ng, let it fail, then go into the directory containing the macports build source, add the include into the 2 files, then run sudo port install ettercap-ng again, it will succeed and your copy of ettercap should work!

Thanks @ Raim in #macports and dmacks in #fink for helping track this down. You can see the bug here.

Original message below:

This is a continuation of the pthread error that I mentioned in a previous post

I finally got it working natively; you might be familiar with the following error when trying to compile ettercap-ng using either fink or natively:

gcc -DHAVE_CONFIG_H -I. -I. -I../../../../include -I/sw/include -O2 -funroll-loops -fomit-frame-pointer -Wall -I/sw/include -I/sw/include -I/sw/include -I/sw/include -g -O2 -c -o libwdg_a-wdg.o `test -f 'wdg.c' || echo './'`wdg.c
In file included from wdg.c:23:
./wdg.h:189: error: syntax error before 'u_char'
./wdg.h:189: warning: no semicolon at end of struct or union
./wdg.h:190: warning: type defaults to 'int' in declaration of 'border_color'
./wdg.h:190: warning: data definition has no type or storage class
./wdg.h:191: error: syntax error before 'focus_color'
./wdg.h:191: warning: type defaults to 'int' in declaration of 'focus_color'
etc etc, errors go on forever...

Well, after poking around in the code I was able to find where to fix the code so that it would compile. Open the directory src/interfaces/curses/widgets/ and edit the files wdg.c and wdg.h

Change all of the occurrences of “u_char” to “int” in these two files, you should now be able to compile without errors.

DISCLAIMER: I don’t know what kind of effect this will have on the curses interface, it will probably break the curses interface permanently, personally I use the text interface the entire time (so I run configure with --disable-gtk so I don’t have to deal with the hassle of installing the gtk/glib libraries), but at least you are able to compile, right?

I’ve tar’d up a patched version of the code and configure script (so you don’t get the pthread error). I am planning on hosting on navi.eight7.org, I will put it up and link to it when I’m able to access the machine (work firewall prevents it).

I’m still getting errors when ettercap tries to forward the packets, but I’m positive they are caused by linking to the wrong version of libnet, that has a different number of arguments to the libnet_write_raw_ipv4() function. If I get a fix I’ll post it here.

./Command/failure......................ok 1/0
./Command/failure......................NOK 24/0# Failed test at ./Command/failure.t line 85.
# ''
# !=
# '0'
./Command/failure......................ok 41/0# Looks like you failed 1 test of 49.
./Command/failure......................dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 24
Failed 1/49 tests, 97.96% okay

… snip …

Failed 1/39 test programs. 1/905 subtests failed.
make: *** [test] Error 1
### execution of make failed, exit code 2
phase compiling: fink-0.27.8-41 failed

Edit the following file:

<bootstrap_dir>/t/Command/failure.t
Replace <bootstrap_dir> with the directory you untar’d the fink-0.27.* tarball into.

Comment out line 85 by changing:
cmp_ok( $!, '!=', 0 );
To be:
#cmp_ok( $!, '!=', 0 );

Rebootstrap the fink and it should install without a problem.

Note: This is totally unsupported by the Fink team, and might produce unintended results According to the mailinglists, the error seems like it’s actually caused by perl 5.8.8 on Leopard instead of 5.8.6 on Tiger, so the test fails. If you want to install perl 5.8.6, you can link /usr/bin/perl to the older version and it should pass the tests.